Page 5 - Technovent Catalogue
P. 5
Elast 42 Elastomer 42 M512 Addition
Addition (Platinum) (Platinum) Silicone Gel
Silicone Rubber 1kg 500g
1kg 500g Low viscosity injectable material for the
General purpose silicone for prostheses. creation of gel filled prostheses.
Lower viscosity but higher hardness than 10:1 cure system.
Techsil 25. Supplied with hard, medium and soft
10:1 cure system. interblendable catalysts.
Cure hardness approx: Shore A 42. Work time approx. 1 hour. Cure time
Standard work time approx 1 hour. approx. 1 hour with heat.
Cure with heat or at room temperature Used in conjunction with M511 as an outer
under pressure. skin.
M514 Anti Slump M72 Full Prosthetics
Agent Starter Kit
20g Kit provides all you need to construct
silicone rubber maxillofacial prostheses
Thickening agent for Technovent (attachment systems not included)
silicones. Kit contains:
Allows exact placement of silicone in M73 Silicone Starter Kit
mould. 8 x Technovent Master Colours
8 x Technovent Skin Colours
4 x Technovent Flocking
3 x Technovent Extrinsic Colours (10ml size)
1 x Extrinsic Sealant Kit (2 x 10ml size)
M513 Softening
Agent
100g
For use with M511 Silicone.
Reduces hardness to Shore A 15-20.
M510 Gel Part B
100g
Use with M511 Silicone instead of
standard catalyst to create gel silicones.
Will remain tacky, needs to be skinned
with standard M511 Silicone.
Technovent
E: info@technovent.com | T: +44 (0)1656 768566 | F: +44 (0)1656 650780 Silicone Systems 5