Page 6 - Technovent Catalogue
P. 6
Factor II (LSR) Silicone Systems
A-588-1 & A-588-2 VST Silicone
Realistic Silicone Elastomer
450g 450g
10:1 cure system. 10:1 cure system.
Cure hardness approx: Low viscosity, translucent silicone.
A-588-1 Shore A 14. VST-01 Shore 00 11, cure time 30 min
A-588-2 Shore A 18. VST-05 Shore 00 31, cure time 30 min
Cure overnight at room temperature or VST-10 Shore 00 35, cure time 30 min
accelerate with heat. VST-30 Shore A 23, cure time 25-30 min
VST-50 Shore A 30, cure time overnight
VST-50F Shore A 28, cure time 2-3 hours
VST-50HD Shore A 38, cure time overnight
A-2000 Silicone LSR Silicones
Elastomer 900g
900g 1:1 cure system.
1:1 cure system Long work time.
Cure hardness: Shore A 20 Translucent paste forms a tough, optically clear
Cure at room temperature or accelerate silicone. Ideal for high pressure moulding.
with heat.
Excellent elongation properties. A-221-05-LSR Shore A 05, heat cure.
A-223-30-LSR Shore A 30, heat cure.
A-223-40-LSR Shore A 40, heat cure.
A-225-50-LSR Shore A 50, heat cure.
A-225-60-LSR Shore A 60, heat cure.
A-2006 Silicone A-300-1 Thixo
Elastomer 30g
450g Translucent thixotropic additive.
1:1 cure system Allows exact placement of silicone in
Cure hardness: Shore A 12 mould.
Cure at room temperature for 3-4
hours then elevate temperature for an
additional 3-4 hours.
Excellent elongation properties,
translucent elastomer.
A-300-8 Thixo
30g
Translucent thixotropic additive.
Allows exact placement of silicone in
mould.
Compatable with VST Silicones.
6 www.technovent.com